Keenetic Runner 4G

Key features

Model number	KN-2211 ( What's new? )
CPU	MT7628N 575 MHz
RAM	128 MB DDR2
Flash memory, Dual Image	32 MB
Wi-Fi class	N300
Wi-Fi antennas	2.4 GHz: 2 external
Wi-Fi client capacity	2.4 GHz: Up to 75
Ethernet ports	4 × 100 Mbps
WPS/Wi-Fi button	✔
Mobile data connection	Built-in ASR1803S LTE modem
Mesh Wi-Fi System	✔

Performance

2.4 GHz Wi-Fi network	300 Mbps (802.11n) 2T × 2R: 2SS, 40 MHz
IPoE/PPPoE routing	Up to 95 Mbps
L2TP/PPTP routing	Up to 95 Mbps
WireGuard throughput	Up to 45 Mbps

Mobile data network

Supports 4G	✔
Supports 3G	✔
Maximum network speed	Up to 150 Mbps (Cat.4)
Detachable mobile antennas with SMA connectors	4 dBi
SIM card slot	nano-SIM
SMS receiving/sending	✔
USSD request support	✔
Supported bands	FDD-LTE B1/B3/B5/B7/B8/B20 (2100/1800/850/2600/900/800 MHz) TDD-LTE B38/B40/B41 (2600/2300/2500 MHz); HSPA+/HSDPA/HSUPA/WCDMA B1/B5/B8 (2100/850/900 MHz).

Wireless network

Seamless roaming 802.11k/r/v	✔
Pre-configured Wi-Fi protection	✔
WEP, WPA-PSK	✔
WPA2-PSK, WPA2-Enterprise	✔
WPA3-PSK, WPA3-Enterprise, OWE	✔
Multiple Wi-Fi networks	Up to 7
Access control by MAC address	✔
Wi-Fi Multimedia (WMM)	✔

Features and protocols

IPoE, PPPoE, PPTP, L2TP, 802.1x	✔
Multi-WAN	✔
Policy routing	✔
Internet connection backup	✔
Ping Check connectivity monitor	✔
PPPoE/PPTP/L2TP pass-through	✔
VLAN IEEE 802.1Q	✔
Routing table (DHCP/Manual)	✔
IntelliQoS	✔
DHCP (client/server)	✔
IPv6 Dual Stack	✔
NAT	✔
IGMP	✔
UDP to HTTP proxy	✔
UPnP	✔
Manual port forwarding	✔
SPI firewall with protection against DoS attacks	✔
PPTP (client/server)	✔
L2TP over IPSec client/server	✔
OpenVPN client/server	✔
SSTP client/server	✔
Ethernet-over-IP, IP-IP, GRE	✔
IPsec VPN (client/server)	✔
WireGuard	✔
Dynamic DNS client	✔
Direct or cloud access via KeenDNS	✔
HTTPS security for access via KeenDNS	✔
SafeDNS parental control	✔
AdGuard ad blocker	✔
Traffic statistics per client	✔
Bandwidth limit per client	✔
Access schedule per client or interface	✔
Guest hotspot with authentication (Captive Portal)	✔

Troubleshooting and management

Cloud-based Remote Network Monitoring and Management	✔
Mobile app for Android and iOS	✔
Web Interface with the Initial Setup Wizard and HTTPS security	✔
Command Line (CLI) via TELNET/SSH	✔
An option to control from external network	✔
Backup and restore configuration	✔
Automatic OS updates	✔
System event logging	✔

Physical specifications and environment requirements

Device dimensions excluding antenna, w x d x h	159 mm × 110 mm × 29 mm
Device weight	236 g
Operating temperature	0–40 °С
Operating humidity	20–95% non-condensing
Power supply voltage	100–240 V 50/60 Hz

Package contents

Device	✔
4G antennas	✔
Power adapter	12 V 1 A
Ethernet cable	✔
Quick start guide	✔

Certificates

EU Declaration of Conformity	CE-KN-2211-EN
EU Data Act Statement	4G/5G Routers

Previous generations of the model

Keenetic Runner 4G (KN-2210)

Quick Start Guide

Multilingual quick start guide

Safety Instructions

Your Keenetic device is ONLY for indoor use — NEVER use it outside.
Before use, remove protective labels from your Keenetic device, and ensure vents are unblocked.
Never use your Keenetic device in an enclosed space, and ensure that the Keenetic-supplied power adapter is always easily accessible.
ONLY use a Keenetic-supplied power adapter — cease to use any damaged adapter IMMEDIATELY.
Your Keenetic device and its power adapter contain no user-serviceable parts — DO NOT OPEN.
Keep your Keenetic device away from water, excessive humidity or heat, and direct sunlight.
Your Keenetic device can be safely wall-mounted using two screws, firmly attached, on any wall surface strong enough to support 4 times the device's weight.

Product Materials And Packaging — Recycling Information

See details